KILZ® Drywall Primer & Sealer seals new uncoated drywall which helps achieve a uniform professional quality finish in less coats. It dries fast (ready to paint over in 1 hour), easy to clean-up and ready to apply with standard applicators. KILZ® Drywall Primer prevents new drywall surface from absorbing too much paint. Helps achieve a uniform professional quality finish and evenly seals drywall to prevent flashing, making the topcoat more uniform.
Should be used under low sheen paints only. Do not topcoat with glossy paint sheens.
Seals Porous Surface
Interior
Available in Gallon, 2 Gallon, 3.5 Gallon, and 5 Gallon containers
Please check availability before visiting your local retailer.
For use on new uncoated drywall. Seals porous drywall to achieve a uniform, professional quality finish in less coats. Fast drying, Low VOC, ready to spray, brush or roll. Easy soap and water clean-up. Greenguard Gold Certified.
Interior use. Use on new, bare and uncoated drywall, gypsum and some types of plaster.
300 to 400 sq ft/gal
The following steps are recommended for product performance.
*WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
Application
IMPORTANT! Do not open can without reading instructions.
Read More
Dry Time at 77°F (25°C), 50% RH
Read More
Clean Up & Disposal
Read More
Read More
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option and upon presentation of proof-of purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or visit www.epa.gov/lead. www.epa.gov/lead.
USE ONLY WITH ADEQUATE VENTILATION
CAUTION! IRRITANT! HARMFUL OR FATAL IF SWALLOWED. CAUSES EYE AND SKIN IRRITATION. MAY CAUSE RESPIRATORY TRACT IRRITATION. CONTAINS CALCIUM CARBONATE, CRYSTALLINE SILICA AND TITANIUM DIOXIDE. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING VAPORS, SPRAY MIST AND SANDING DUST. Sanding, grinding or abrading may release sanding dust, which may be harmful if inhaled and has been shown to cause lung damage or cancer with long term exposure. Do not breathe dusts, vapor, or spray mist. To avoid breathing in dust, vapors, and spray mist, open windows and doors or use other means to ensure fresh air entry during application, drying, sanding, and/or abrading. If properly used, a respirator (NIOSH approved with particulate pre-filter) may offer additional protection and should be used if adequate ventilation cannot be provided; obtain professional advice before using. If you experience eye watering, headaches, or dizziness during application or drying, increase fresh air or leave the area. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experience, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 20 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
KEEP OUT OF REACH OF CHILDREN – DO NOT TAKE INTERNALLY
Read More
Base
Water
Int/Ext
Interior
Color
White
Coverage - Low
300 sq ft/ gal
Mils Wet
5.3
Mils Dry
0.8
Coverage High
400 sq ft/ gal
Mils Wet
4
Mils Dry
0.6
Coverage High
400 sq. ft.
Mils Wet
4
Mils Dry
0.6
Min Application Temp
50°F (10°C)
Max Application Temp
90°F (32°C)
Viscosity
95 - 105 KU
Dry To Touch
30 min
Dry To Recoat
1 hour
VOC
<100 g/L
Max Tint
2 oz.
Brush
Nylon / Poly
Roller
3/8" - 1/2" nap
Spray Tip
.017" - .021"
Spray Filter
60 mesh
Spray Pressure
2,500 - 3,200
Volume Solids
16%
Weight Solids
27%
Flash Point
N/A
PRIMER TIPS
Confidently select a KILZ primer that works best for your project by learning how to choose a paint primer for different substrates and the importance of using primer.
KILZ BLOG
Be the first to know about new products, contests, our latest promotions and more.