KILZ® STAINBLOCKING CEILING PAINT
KILZ® STAINBLOCKING CEILING PAINT is a unique combination of stainblocking technology and a coverage/dry time indicator. It rolls on easily with minimal spattering and a subtle pink color that quickly dries to white. It can be used on all interior ceilings.
Finish
Spatter Resistant, Self-Priming.
Best For Use On
Ceilings of all surface types.
Coverage
250-400 Sq. Ft./Gal.
TECHNICAL DOCUMENTS
THE FOLLOWING STEPS AND PRODUCTS ARE REQUIRED:
- The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew, wallpaper paste. If washing is necessary, use a nonsoapy detergent or a TSP substitute. Rinse well and allow to dry.
- Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.
- Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before painting.
- Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before painting
†WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
Application
- Eye protection is recommended.
- Apply if surface, air and product temperatures are between 50°-90°F.
- Stir thoroughly before and occasionally during use. Using a brush, roller or sprayer. Back roll sprayer applications.
- Use a quality Nylon/Polyester brush or a 3/8 - 1/2" nap quality roller depending on surface texture.
- Coverage varies by porosity. Coverage will be approximately 250 sq. ft. per gallon on porous surfaces; up to 400 sq. ft. per gallon on smooth, nonporous surfaces.
- Multiple coats may be required for complete hide.
Read More
Dry Time at 77°F (25°C), 50% RH
- Dries to touch in 1 hour.
- Color indicator will fade to white in under 1 hour.
- Wait 2-4 hours before recoat.
- Additional dry time may be needed in cooler temperatures and higher humidity. Premature heavy traffic may affect film integrity.
Read More
Clean Up & Disposal
- Use soap and water to clean hands, tools, and spills.
- Do not dispose of this product down a drain. For recycling or disposal information contact your local household refuse collection service.
Read More
Read More
WARRANTY
*LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
Warning!
If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
Warning!
This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
Caution!
IRRITANT! HARMFUL IF SWALLOWED. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use. KEEP OUT OF REACH OF CHILDREN – DO NOT TAKE INTERNALLY.
First Aid
If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
Read More
PRODUCT SPECIFICATIONS
Int/Ext
Interior
At 250 Sq. Ft./Gal. (Wet)
6.4 Mils
At 250 Sq. Ft./Gal. (Dry)
2.4 Mils
At 400 Sq. Ft./Gal. (Wet)
4.0 Mils
At 400 Sq. Ft./Gal. (Dry)
1.5 Mils
VOC
49 g/L
Brush
Nylon / Polyester
Roller - Smooth
1/2" - 3/4" nap
% Solids by Volume:
42%
% Solids by Weight:
56%
Weight / Gallon (lbs)
11.3
Viscosity
95-105 KU
Flashpoint
N/A
Sheen @ 85°
<5
Resin Type
Acrylic Polymer
PRIMER TIPS
The Right Applicator Can Make a Big Difference
Find tips from paint professionals and discover the different types of paint brushes in market along with the best paint brushes to use for various projects.
KILZ BLOG
