KILZ®Ceiling Paint with Stainblocking

KILZ® Ceiling Paint is a low odor, zero VOC primer and topcoat that has KILZ® PREMIUM stainblocking technology. It blocks out most common ceiling stains and rolls on easily with minimal spattering. Dries quickly to flat white. Use on interior ceilings including woodwork, drywall, plaster, stucco, paneling, masonry, brick, painted metal and properly prepared glossy surfaces.*

*Formulated without addition of VOC-containing solvent. Raw materials may contribute negligible amounts of VOC. VOC <5 g/L, excluding colorant(s).

WHERE TO BUY

Please check availability before visiting your local retailer

Available in Gallons

Surface Preparation

  • The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew, wallpaper paste.

  • If washing is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.

  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.

Application

  • Eye protection is recommended. A small amount of water may be added for spray applications, but do not thin for stainblocking applications. Only apply if surface, air and product temperatures are between 50°-90°F. Stir thoroughly before and occasionally during use. Apply using a brush, roller or sprayer. Back-roll sprayed applications.

  • Stainblocking: Multiple coats may be required for complete stainblocking and hide.

  • Tinting: Not recommended for stainblocking applications. KILZ® Ceiling Paint may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects.

  • Coverage: Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.

Dry Time at 77°F (25°C), 50% RH

  • Dries to the touch in 30 minutes and can be recoated in 2 hours.

  • For maximum stainblocking, recoat after 4 hours.

  • Application at lower temperatures, high humidity or poor ventilation will affect dry time.

Clean-Up & Disposal

  • Clean equipment and paint spatters with warm, soapy water. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.

  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.