Logo

KILZ® Ceiling Paint with Stainblocking

KILZ® Ceiling Paint with Stainblocking

Bookmark and Share
      

KILZ® CEILING PAINT is a low odor, zero VOC primer and topcoat that has KILZ® PREMIUM stainblocking technology. It blocks out most common ceiling stains and rolls on easily with minimal spattering. Dries quickly to flat white. Use on interior ceilings including woodwork, drywall, plaster, stucco, paneling, masonry, brick, painted metal and properly prepared glossy surfaces.*

*Formulated without addition of VOC-containing solvent. Raw materials may contribute  negligible amounts of VOC. VOC <5 g/L, excluding colorant(s).

Where to Buy

The Home Depot Find a Store   Buy Now

   Available in
    Gallons 6810 - MSDS   |   KILZ Ceiling Paint with Stainblocking - TDS

PRODUCT SPECIFICATIONS
Base Water
Int/Ext Int
Color White
Coverage - Low 300 sq. ft.
Mils Wet 5.3
Mils Dry 2.5
Coverage - High 400 sq. ft.
Mils Wet 4.0
Mils Dry 1.9
Finish @ 85o < 10
Min Application Temp 50oF (10oC)
Max Application Temp 90oF (32oC)
Dry To Touch 30 min
Dry To Recoat 1 hour
Max Tint 2 oz
VOC 4 g/L
Brush Nylon / Poly
Roller - Smooth 3/8" - 1/2" nap
Roller - Porous 1/2" - 3/4" nap
Spray Tip .015" - .021"
Spray Filter 60 mesh
Spray Pressure 2,500 - 3,000
Volume Solids 47.0% (+/-) 2%
Weight Solids 59.9% (+/-) 2%
Viscosity 95 - 105 KU
Flashpoint N/A

WHERE TO USE

Use on properly prepared interior surfaces, such as:

  • Brick
  • Painted Metal
  • Properly Prepared Glossy Surfaces†
  • Drywall
  • Paneling
  • Stucco
  • Masonry
  • Plaster
  • Wood

SURFACE PREPARATION†
  • The surface must be clean, free of dust, grease, wax, peeling paint, mold, mildew, wallpaper paste.
  • If washing is necessary, use a non-soapy detergent or a TSP substitute. Rinse well and allow to dry.
  • Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.

APPLICATION
  • Eye protection is recommended. A small amount of water may be added for spray applications, but do not thin for stainblocking applications. Only apply if surface, air and product temperatures are between 50°-90°F. Stir thoroughly before and occasionally during use. Apply using a brush, roller or sprayer. Back-roll sprayed applications.
  • Stainblocking: Multiple coats may be required for complete stainblocking and hide.
  • Tinting: Not recommended for stainblocking applications. KILZ® CEILING PAINT may be tinted with up to 2 ounces of universal colorant per gallon for non-stainblocking projects.
  • Coverage: Coverage is up to 300 square feet per gallon on porous surfaces; up to 400 square feet per gallon on smooth, nonporous surfaces.

DRY TIME at 77°F (25°C), 50% RH
  • Dries to the touch in 30 minutes and can be recoated in 2 hours.
  • For maximum stainblocking, recoat after 4 hours.
  • Application at lower temperatures, high humidity or poor ventilation will affect dry time.

CLEAN UP & DISPOSAL
  • Clean equipment and paint spatters with warm, soapy water. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.
  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

*LIMITED WARRANTY

If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option, either furnish an equivalent amount of new product or refund the purchase price to the original consumer purchaser of this product upon proof of purchase. Masterchem Industries will not be liable for any representations or warranties made by any retail seller or applicator of this product. This warranty excludes (1) labor or cost of labor for the removal of this product or any other product, the repair or replacement of substrates to which this product is applied or the application of replacement product and (2) any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is not transferable. This warranty gives you specific rights and you may also have other rights which vary from state to state. To make a warranty claim, write to Technical Service, Masterchem Industries LLC, 3135 Old Highway M, Imperial, MO 63052-2834, or e-mail Technical Service at techservice@masterchem.com.


†WARNING!

This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

USE ONLY WITH ADEQUATE VENTILATION

WARNING! IRRITANT! HARMFUL OR FATAL IF SWALLOWED. Avoid contact with eyes. May cause eye, nose and throat irritation. Avoid breathing of dust, vapors or spray mist. Open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headache, or dizziness, or if air monitoring demonstrates vapor / mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH / MSHA TC 23C or equivalent) during and after application. Follow respirator manufacturer’s direction for respirator use. Close container after each use. Wash thoroughly after handling and before smoking and eating.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

FIRST AID: If swallowed, do not induce vomiting. Get medical attention immediately. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately. In case of eye contact, flush eyes immediately with plenty of water for at least 15 minutes and get medical attention.

KEEP FROM FREEZING. If frozen let thaw at room temperature.

KEEP OUT OF REACH OF CHILDREN!


Back To Top Back To Top
Back To Top Back To Top