KILZ COMPLETE COAT™ Satin

KILZ COMPLETE COAT™ PAINT & PRIMER IN ONE Interior/Exterior Satin Paint is a low VOC, low odour, premium product with excellent hide. It is highly scrubbable and easy to touch-up, resists staining, fading, and peeling. It also offers a mildew resistant finish.

WHERE TO BUY

Please check availability before visiting your local retailer

M591
M592
M593

Available in Quarts, Gallons, Fives

Where to Use

  • Ideal for interior walls, trim, windows, cabinets, woodwork and doors. Excellent for bedrooms, family rooms, dining rooms, kids’ rooms and offices.

  • Great for exterior siding, trim, windows, doors, woodwork, shutters, and fencing.

  • For use over properly prepared and previously painted or primed surfaces.

  • Apply to drywall, wood, vinyl, masonry, stucco, brick, cured plaster, aluminum.

  • NOTE: For vinyl siding, only paint with a colour lighter than the original siding colour.

Priming

Drywall, Plaster, Masonry and Wood:

  • 2 coats of KILZ COMPLETE COAT™ Paint is minimum required for new or uncoated surfaces and surfaces with severe tannin and stains.

Ferrous & Non-Ferrous Metals: 

  • For previously painted metal surfaces, use KILZ PREMIUM Water Based Interior/Exterior Primer.

Surface Preparation

  • Use on properly prepared and previously painted or primed surfaces. Remove any loose or peeling paint and wash off dirt or grease with a non-soapy detergent or a TSP substitute. Rinse well and allow surface to dry.

  • Countersink all nailheads, repair imperfections and sand smooth.

  • Glossy surfaces must be scuff sanded with appropriate sandpaper prior to coating.

  • Remove dust with a damp cloth and allow to dry.

  • Allow new stucco, plaster and masonry to cure for 30 days before priming and painting.

Application

COVERAGE RATE: 28-33 m² per 3.79 L depending on the surface texture, porosity and the application method.

RECOMMENDED FILM THICKNESS:

  • Film thickness depends on porosity of surface and various substrate irregularities.

  • At 18 m² per 3.79 L: Wet: 8 mils; Dry: 3.2 mils

  • At 28 m² per 3.79 L: Wet: 5.3 mils; Dry: 2 mils

  • At 33 m² per 3.79 L: Wet: 4.6 mils; Dry: 1.8 mils

APPLICATION

Airless Spray:

  • Tip: .015" - .021"

  • Filter: 60 mesh

  • PSI: Fluid pressure of 1,500 - 2,200

Roller:

  • Smooth Surfaces: 10 - 13 mm nap

  • Rough Surfaces: 13 - 19 mm nap

Brush:

  • Nylon / Polyester Blend

DO NOT THIN if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a ratio of no more than 240 ml per 3.79 L.

 

Dry Time 25°C and 50% RH

DRY TIME @ 25°C and 50% RH:

  • To Touch: 2 hour

  • To Recoat: 4 hours

  • Full Cure: 2 weeks

  • Darker colours may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.

Clean-up & Disposal

  • Clean all tools and equipment with clean water.

  • For disposal of empty containers and unused product, contact your household refuse collection service.

  • To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.