KILZ COMPLETE COAT™ Flat

KILZ COMPLETE COAT™ PAINT & PRIMER IN ONE Interior Flat Paint is a low VOC, low odour, premium product with excellent hide. It is highly scrubbable and easy to touch-up, resists staining, fading, and peeling. It also offers a mildew resistant finish.

WHERE TO BUY

Please check availability before visiting your local retailer

M3931
M3932
M3933

Available in Quarts, Gallons, Fives

Where to Use

  • Walls and ceilings. Excellent for bedrooms, family rooms, dining rooms, kids’ rooms, hallways and offices.

  • Apply to drywall, stucco, masonry, aluminum, wood, brick.

  • For use over properly prepared and previously painted or primed surfaces.

Priming

  • For best results, use two coats on lightly stained, porous and repaired surfaces. For heavily stained surfaces, we recommend applying a coat of primer such as KILZ® PREMIUM Primer/sealer/stainblocker.

Surface Preparation

  • Use on properly prepared and previously painted or primed surfaces. Remove any loose or peeling paint and wash off dirt or grease with a non-soapy detergent or a TSP substitute. Rinse well and allow surface to dry.

  • Countersink all nailheads, repair imperfections and sand smooth.

  • Glossy surfaces must be scuff sanded with appropriate sandpaper prior to coating.

  • Remove dust with a damp cloth and allow to dry.

  • Allow new stucco, plaster and masonry to cure for 30 days before priming and painting.

Application

  • Use product when the surface and air temperatures are between 10-32°C.

  • Stir paint occasionally. Intermix containers of the same product to ensure color and sheen uniformity.

  • COVERAGE RATE: 28-33 m² per 3.79 L depending on the surface texture, porosity and the application method.

  • RECOMMENDED FILM THICKNESS:

  • Film thickness depends on porosity of surface and various substrate irregularities.

    • At 18 m² per 3.79 L: Wet: 8 mils; Dry: 3.2 mils

    • At 28 m² per 3.79 L: Wet: 5.3 mils; Dry: 2.2 mils

    • At 33 m² per 3.79 L: Wet: 4.6 mils; Dry: 1.8 mils

  • Airless Spray:

    • Tip: .015" - .021"

    • Filter: 60 mesh

    • PSI: Fluid pressure of 1,500 - 2,200

  • Roller:

    • Smooth Surfaces: 10 - 13 mm nap

    • Rough Surfaces: 13 - 19 mm nap

  • Brush:

    • Nylon / Polyester Blend

    • DO NOT THIN if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a ratio of no more than 240 ml per 3.79 L.

Dry Time 25°C and 50% RH

  • Dries to touch in 2 hours 25°C and 50% RH or longer in cooler temperatures and/or higher humidity.

  • To Recoat: 4 hours

  • Full Cure: 2 weeks

  • Darker colours may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.

Clean-up & Disposal

  • Clean all tools and equipment with clean water.

  • For disposal of empty containers and unused product, contact your household refuse collection service.

  • To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.