KILZ® Colour Change Ceiling Paint

KILZ® STAINBLOCKING CEILING PAINT is a unique combination of stainblocking technology and a coverage/dry time indicator. It rolls on easily with minimal spattering and a subtle pink colour that quickly dries to white. It can be used on all interior ceilings.

WHERE TO BUY

Please check availability before visiting your local retailer

Available in Gallons

Preparation†

  • Remove any mildew stains with bleach and water solution or similar commercially available mildew remover, then rinse.

  • Scuff sand glossy surfaces.

  • Remove loose paint and wash off any dirt or grease with a non-soapy detergent such as trisodium phosphate (TSP).

  • Make sure that there are no active water problems and that any previous water damage is fully dry. KILZ® ORIGINAL, KILZ COMPLETE® or KILZ ODOURLESS® Primer is recommended for blocking severe stains.

Application

  • Use only when temperatures are between 10°C and 32˚C.

  • Stir paint prior to use.

  • Coverage varies by porosity. Coverage will be approximately 23 m² per 3.79 L on porous surfaces; up to 37 m² per 3.79 L on smooth, nonporous surfaces.

  • Use quality Nylon/Polyester brush and 10 mm - 13 mm nap quality roller depending on surface texture.

  • Multiple coats may be required for complete hide.

Dry Time

  • Color indicator will fade to white in under 1 hour.

  • Dries to the touch in 1 hour at 25°C and 50% humidity.

  • Recoat as needed after 2 hours, for maximum stainblocking, recoat after 4 hours.

Clean-Up & Disposal

  • Use soap and water to clean hands, tools and spills.

  • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

Cautions / Limitations

  • Eye protection is recommended.

  • Only apply if surface, air and product temperatures are between 10°-32°C.

  • Stir thoroughly before and occasionally during use.

  • Stainblocking: Multiple coats may be required for complete stainblocking and hide.